SB100 Static Inverter / 28 VDC to 230 VAC/50 Hz

Product Description

The SB100 static inverter is a lightweight and uses solid state circuity to invert a 28 VDC input to 230 VAC/50 Hz sine wave output. A crystal controlled oscillator design provides output frequency stability and a pulse width modulated square wave to sine wave power conversion scheme for efficient, reliable, and quiet operation.

The SB series of static inverters can be used to power laptop computers, audio/video entertainment systems, portable electronics (stereo, MP3, CD, DVD, video games, etc), microwave ovens, coffee makers, and medical equipment in airborne applications.

Specifications

• Weight: 7.4 lb (3.36 Kg)
• Input Current: 41.5 ADC
• Input Voltage: 28 VDC (nominal), 20 VDC to 36.5 VDC range
• Output Voltages: 230 VRMS ±5%
• Output Current: 4.3A RMS
• Output Frequency: 50 Hz
• Output Power: 1000 VA
• Output Waveform and Phase: sinewave/single phase
• Harmonic Distortion: 0.5% (nominal)
• Power Factor: +0.8 TO -0.8
• Efficiency: 87% (nominal)
• Response Time: 300 µs (no load to full load)
• Regulation: 1% line, 1% load, 2.5% temperature
• Overload Capacity: 110% of rated power for 2 hrs, 150% of rated power for 5 min. (SSA120 = No Overload)
• Protection Circuit: The inverter will shutdown under the following conditions: Input voltage > 37.5 ±1 VDC Input voltage < 18 VDC ±1.5 VDC Internal high ambient temperature. Short circuit condition (after 2 to 15 Sec)(manual reset)
• Remote On-Off: Yes
• Operating Temperature: -55°C to 71°C (-65°F to 160°F)
• Altitude: 55,000 ft
• Environmental: DO-160C Env. Cat. F3ZBB[ LV] E1XXXXXBXAXXXZXXX
• Cooling: thermostatically controlled brushless fan (on above 50°C)
• Compliance: FAA TSO-C7

Product Codes

• Mfr Part No
  SB100
• ECCN
  3A225
• SCHEDULE B CODE
  8504.40.0040