RHB40 Regulated DC to DC Boost Converter | 8 to 30.5 VDC, 400 W

Weight:
4.4 lbs (2 kg)

Dimensions:
4.00 x 4.20 x 8.25 in (101.6 x 106.6 x 209.5 mm)

Input Voltage:
Normal Voltage: 12 to 24 VDC (for regulated output) Extended Range: 8 to 30.5 VDC

Current:
31 A typical at 14 VDC input voltage & at full load 37 A typical at 12 VDC input voltage & at full load 0.5 A maximum at no load

Overload:
70 A for 15 Sec, 140 A for 2 Sec, 210 A for 1 Sec, or until a 35 A input circuit beaker trips

Operation:
Two modes: Switching (or Regulation) and Override (or Conduction)

Output Voltage:
24 VDC regulated for input voltage from 12 to 24 VDC Greater than 22 VDC, 633 watts for input voltage of 8 VDC Follows input voltage for the input above 24 VDC (Override Mode)

Current:
16.6 A (continuous), 31.5 A (for one minute)

Power:
400 Watts continuous for input voltage from 12 to 24 VDC 633 Watts for 20 seconds at VDC input voltage 750 Watts for 1 minutes at 12 VDC or higher input voltage

Regulation:
3% for load, 2% for line and 3% for temperature

Protection (OL):
Withstands, without damage or degradation, loads exceeding 100% of rated current. Output collapses to input when load exceeds approximately 190% (31.5 A). Unit delivers rated output upon removal of the overload (OL) condition.

Short Circuit:
(SC) Protection: Unit is protected against output short circuit by an external 35 A circuit breaker per MIL-C-5809.

Thermal (OL):
(TO) Protection: Unit is protected against a prolonged thermal overload condition by reverting the operating mode from switching (or regulation) to override (or conduction) mode.

Efficiency:
92% (typical) at 14 VDC input

Temperature:
-45°C to 70°C (Bottom plate temperature not to exceed 75°C)

Altitude:
55,000 ft

Environmental:
Designed to meet FAA TSO-C71 & Do-160C/D by design similarity/analysis F2-BBB(LV)EWXDFSZZAZZYZKXAA

Compliance:
FAA TSO-C71

Finish:
Gold iridite per MIL-C-5541, Class 1A