DC PRO-2 Aviation Headset | Single Ear, Dual Plug, Passive
Product Description
The DC PRO-2 passive noise-attenuating headset combines outstanding comfort, performance and durability in a lightweight, rest-on-ear design. These headsets are ideal for commercial pilots that fly low-noise aircraft where Electronic Noise Cancelling ANR technology is not required. DC PRO-2 headsets provide enhanced audio quality and clear, crisp voice transmission utilizing advanced, noise-cancelling electret microphones.
Features
- Volume control located on ear dome
- Full flex boom for precise microphone placement
- High performance, electret microphone with enhanced noise cancelling
- Rugged, yet lightweight magnesium alloy headband and suspension is adjustable for personalized fit
- 5-ft. straight cord with dual plugs
- Low profile, Outlast® fabric head pad with vented design absorbs excess heat to keep you cool and eliminates 'hot spots'
- Soft foam temple pad and plush leatherette ear seal provide maximum comfort
Specifications
Ear coupling:
Single On-the-ear
Hardware:
Lightweight Alloy
Connector Type:
Standard dual GA plugs
Connection Cable:
0.130” (3.3 mm) O.D. shielded cable, length ~ 5 ft. (1.5 m)
Operating temperature:
-20°C to +55°C
Microphone DC supply voltage:
8 – 16 Volts, not polarity sensitive
Dome type:
ABS
Characteristic SPL:
91 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
Contact pressure:
0.6 lb. (2.7 N)
Total harmonic distortion (THD):
< 1% - 110 dB SPL (300 - 3,000 Hz)
Ear Transducer principle:
Dynamic
Microphone principle:
Pre-polarized condenser microphone (electret), noise cancelling
Mic Impedance:
150Ω nominal
Mic Sensitivity:
400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input
Mic Freq Response:
150 - 8,000 Hz
Source Resistance:
470Ω
Product Codes
- Mfr Part No:43106G-06
- EDMO #:43106G-06
- Brand:DAVID CLARK COMPANY
- Category:Headsets & Intercoms