1291BL Single-Axis Position & Rate Table | 10in Tabletop
Product Description
The Model 1291BL single axis position and rate table system is design to provide precise position, rate and accretion motion for development or production testing of commercial or military inertial sensors. The 1291BL is specially designed for testing smaller inertial sensors and systems.
The accuracy and reliability of the 1291BL test table is achieved with a servo controlled system that consists of a direct drive brushless torque motor, a precision absolute optical encoder, and an internal microprocessor-based motion control card. A standard RS-232 interface provides remote control from a PC computer for position, rate, and acceleration profiles.
This 1291BL Singe-Axis table (EDMO# 1291BL) includes a 10-inch tabletop.
Features
- User-friendly Ideal Aerosmith Table Language (ATL)
- Tests in a Vertical or Horizontal Axis Configuration
- Precision-ground anodized aluminum tabletop
- Trapezoidal motion profiles with programmable velocity and acceleration
- Sinusoidal Motion with programmable frequency and amplitude
- Capable of querying the current position, velocity, and acceleration
- Configurable and scalable Analog Input
- Configurable and scalable Analog Output (1 KHz update frequency)
- Digital closed loop servo control
- RS-232 Remote Interface
- LabVIEW Interface
- Electric fail-safe brake
- Brake release switch located on the table
- Axis Active LED
- CE Mark
Specifications
Weight:
95 lb (43.1 kg), test table without tilt stand
50 lb (23 kg), control chassis
Dimensions:
10.2 x 10.8 x 14.8 in (259 x 274 x 376 mm), test table
19 x 18.6 x 7 in (483 x 472 x 178 mm), control chassis
Leveling Range:
± 1°
Controller:
Type: a user supplied PC with RS-232, or IEEE-488 is required
Communications Interface: RS-232 standard (max. 115,200 baud)
Analog Input: Rate or Position. Two ±10V, 16-bit inputs (scalable)
Analog output: Position, Velocity, Rate or Position Error ±10V = full scale, scalable, 16 bit resolution. Update Rate is 1 KHz
Software Controller: Uses simple software command set (ATL) via host PC
Temperature:
50°F to 95°F (10°C to 35°C), operating
-20°F to 120°F (-29°C to 35°C), non-operating
Relative Humidity:
20% to 85% non-condensing
Power Requirements:
IEC 60320 Power Entry Connection
115/230VAC ± 10%, 1Ø, 50/60 Hz, 5A(FLA), 10A BREAKER, 5kA
SCCR (230VAC Required for speeds over 2000 deg/sec)
Product Codes
- Mfr Part No:231150-10
- EDMO #:1291BL
- Brand:IDEAL AEROSMITH